Replacing LCD Screen On Star N8000 N8800

For some Chinese smartphones,it is little hard to repair/replace broken LCD screen because the manufacturer change the parts like LCD,back camera frequently .We take Star Kingelon N8000/N8800 as an example.

N8000 LCD screen and back camera had been changed from one model to the other in its life time.  And the manufacturer can only provide the LCD in model HLY_546HX_862D now. If the user had to change their n8000’s lcd, Flashing ROM to install right driver is needed .

Before flashing the ROM,the user must prepare these things:

1. Installing MTK Smartphone Driver (!osgC1IIC!4SITuG6yqkgizdiO-zElzsUjxEPeZxjUZciIiZDTVLM )on PC;

2. Flash tool for N8000 MTK6582:!cpw0hLpC!76a3fzTorYeExpqBp_iVs6r9B5j8RIYpxjuozUBt5Gg ;

N8800 MTK6592:!p5omDKzZ!Qj1lpwugxvKrONPMXn8ZKAvtly5C6KNQujHg_6vYDwQ

3. Make sure which sub camera and main camera in user’s n8000: Press “volume-” key and “Power” key at the same time,don’t loose the “volume-” key until entering factory mode, use volume key to move to “Version”,then use “Power” key to enter “Version”,you will see the “main camera/sensor” ,”sub camera/sensor” and “LCD/lcm” model about your n8000 like the picture.version in factory mode

4. Star N8000 Kitkat ROM:!o4BmwZ4Q!4fl09xFm5Ta5Mjt16aKmxWOc8CclufMuyf_cR9lLpWU


Flashing steps:

1. Installing driver on your pc;

2. Run “SPMultiPortFlashDownloadProject.exe” in flash tool;

3. Choose “MT6582_Android_scatter.txt” in ROM, choose right main camera,sub camera(gc2235 mostly) and LCD “HLY_546HX_862D”  according to the version you had checked.

LCD-N8000-24. Click “Start all”,then put the battery in your n8000, connect it to the PC by using USB Cable,wait few minutes until download ok.


If the user can not check the Version to make sure the main camera, please choose “OV5647” to flash first. If the main camera can not work , change to “OV8825” or “s5k4e1” to flash again.

This entry was posted in Chinese Android phones ROM and tagged , , , , . Bookmark the permalink.